For the 119th U.S. Open Championship at Pebble Beach, Cisco delivered the most connected U.S. Open in history. With over 200,000 expected in attendance, the USGA wanted to provide new ways for fans to consume and share content, both on-site and around the world. As 156 golfers and hundreds of thousands of fans walked the course, Meraki provided first of its kind, course-wide Wi-Fi. This included wireless for indoor, outdoor, and the first-ever test of Wi-Fi 6 access points at a major sporting event.
“For the first time ever, thanks to Cisco, we had the confidence that our fans would be able to stay connected to all the action inside the ropes and with friends and family back home no matter where they went on the course.” – Amanda Weiner, Senior Director, Digital Media, USGA
Hundreds of access points were deployed in a matter of days to blanket an ultra high density environment, and close to 39TB of internet traffic was transferred during the event. 70,000 unique clients roamed across the four-mile long Pebble Beach course, during a nationally televised event with 32 million people watching.
While Meraki Access Points are deployed in stadiums, golf courses add several unique challenges. These include the size of the course, weather conditions, and variability of Wi-Fi hot zones. Physical mounting, directional antennas, and RF settings must be configured to ensure a seamless fan experience. In addition, high-density areas like the media center and U.S. Open merchandise tent needed to be carefully planned to ensure high performance. The onsite media center at the course required connectivity for over 2,000 daily unique clients.
With Meraki Wi-Fi as the first point of network access across the course, we were able to introduce a number of innovative features within our U.S. Open App and video boards to enhance the fan experience.” – Amanda Weiner, Senior Director, Digital Media, USGA
The visibility of the Meraki dashboard and simplicity of configuring Wi-Fi was critical in delivering the connected course. The team was able to detect hot zones, deploy and tune the entire network in under a week. New Wi-Fi 6 APs were installed to allow the high density merchandise pavilion on the course to transfer close to 3TB of data. To learn more, take a look at the on-demand webinar to understand their technology strategy, and learn how the Meraki Wi-Fi network helped deliver a connected fan experience. Watch now
This is the sixth in a series of blog posts that focus on wireless technology and security at Cisco Meraki.
The frequency spectrum that wireless networks operate in are shared frequency spectra; this is one of the reasons that Wi-Fi networks are so polite with one another. However, there are many more potential sources of interference, such as Bluetooth and microwave ovens in the 2.4GHz spectrum or medical scanners and radar in the 5GHz spectrum.
These sources of interference can have a detrimental effect on the usability of wireless networks. Meraki Auto RF is a powerful and automated RF optimization solution that ensures that Meraki APs create the best possible environment for the clients served.
Listen and Learn
Auto RF is able to do this because all Meraki APs have a dedicated security radio that also provides visual spectrum analysis. The Meraki APs also share this data with the Auto RF algorithm to determine the optimal channel plan and transmit power appropriately. In addition to this, Meraki network administrators can also get access to real-time channel utilization scans from the live tools section of each and every AP, as shown below:
This gives the administrator both instantaneous and historical data about interference sources seen by that particular AP. This listening radio can also be accessed to provide information in an industry-standard format too, which has traditionally only been available on dedicated spectrum analysis tools.
For customers with older Meraki APs without dedicated listening radios, it is possible to configure the access radios so that they periodically stop serving clients and start listening to the RF.
Auto channel is enabled by default on Meraki networks but can be turned off if desired. When enabled, the Meraki dashboard follows best practice for channel use, meaning that only the three non-overlapping channels in the 2.4GHz spectrum are available. In the 5GHz spectrum, the channels available to the AP depends on both the country and hence regulatory domain that the AP is installed in and the type of AP, i.e. indoor or outdoor. Additionally the network administrator can choose to exclude DFS channels, which will prevent the AP from having to roam away from a channel if a radar signal is detected. Finally, administrators can also select the default channel width for transmission in the 5GHz band, as 802.11n supports channel widths of 40 MHz and 802.11ac supports channel widths of 80 MHz and up to 160 MHz, although 160 MHz is not suitable for enterprise deployments or supported in the Meraki dashboard.
In order to tune the transmit channel, the APs track the following three things:
Usage Demand – APs within the dashboard network are monitored for their usage demand, i.e. the number of clients and amount of traffic being served by the AP. These values are mathematically combined so that each AP has a weighted value. This value is then used to ensure that the cleanest channels are utilized in the most demanding areas.
Airtime Availability – Each access point listens to the contention and airtime availability, i.e. free time in the medium, for each channel and bandwidth combination. When this data is aggregated it can be used to maximize the available airtime for all APs in the network, also known as the Basic Service Set (BSS), and also minimizes contention and improves client roaming performance. All visible APs — even neighboring APs — are considered in this metric, with Meraki APs being weighted higher to optimize roaming and airtime usage distribution. As opposed to just being polite (i.e. presuming they have as high a priority to the airtime as the Meraki AP and they’re clients) with respect to neighboring networks and APs, this metric ensures that the AP and its clients also have ample airtime availability.
Channel Utilization – This metric includes both 802.11 and non-802.11 (Bluetooth, microwave ovens, etc.) sources of spectrum utilization. These external sources of interference are detected and accounted for within this metric.
The dashboard uses this information to tell the APs to move to a different channel if, say, a new AP is added, a channel becomes jammed, or the network administrator clicks the “Update Auto Channels” button.
Channel moves can also be triggered by the “Steady State” process, which runs every 15 minutes. The Steady State process will instruct the AP to move channels if a better channel, based on the above criteria exists. However, the Steady State process is aware when a channel is being used for point-to-point communications and it will not change the channels of APs acting as a gateway AP.
Auto Tx Power
Auto Tx Power operates by sampling the signal-to-noise ratio of neighboring APs in the same network. These readings are compiled into neighbor reports that are sent to the dashboard for processing. All AP neighbor reports are then aggregated and the dashboard leverages that aggregated data to determine each AP’s direct neighbors — APs that clients being served by the AP are likely to roam to — and how much each AP should adjust its transmit power to optimize cell coverage. The dashboard completes this calculation and instructs the APs to adjust their respective transmit power once every 20 minutes.
As with Auto Channel, Auto Tx Power is mesh-aware and the same Steady State process/algorithm prevents power adjustments for APs that are acting as a gateway for an active mesh repeater.
Conclusion
Meraki’s Auto RF technology auto-tunes the RF for all but the most particular RF environments, and it does so without any need for additional appliances, services or licenses, by leveraging the power of the power.
With so many different types of wireless devices out there today, you’re probably experiencing radio frequency (RF) interference in your wireless network whether you know it or not. RF interference is ubiquitous and there is no way to completely avoid it; the best you can do is identify sources of interference and take them into account when designing your network. Meraki has introduced a new tool in Dashboard to determine whether interference is affecting your network adversely and to help you optimize your network for the local RF environment.
In the Meraki Dashboard, go to the access points list under the Monitor tab, and click on any active access point. The channel utilization graph shows the percentage of time the access point has seen RF interference on its channel. For example, if the access point is operating on channel 1 in the 2.4 GHz band, then the graph will show the amount of time channel 1 has seen interfering RF energy.
The percentage of utilization on the channel proportionally affects the peak performance that access points will be able to achieve. Percentages higher than 30% can cause considerable connectivity issues. Here are some suggestions for reducing or coping with high levels of interference:
1. Perform an RF site survey before deploying your network. You can use the Real-Time Spectrum Analysis tool found on the Client Survey Tool tab of my.meraki.com with a battery-powered access point or a 3rd party spectrum analyzer to get an overview of the RF environment in your chosen place of deployment before installing your APs.
2. Remove interfering devices from the area. Common culprits are 2.4 GHz cordless phones, Bluetooth gadgets, microwaves and wireless video cameras. A 3rd party packet sniffing tool can be very helpful to identify and locate interference sources.
3. Ensure adequate wireless coverage to avoid weak spots; a weak signal from your access points is more easily degraded by local RF interference compared to a strong signal.
4. Avoid using the same channel as neighboring wireless networks.
5. Turn on channel spreading in Dashboard (go to the Configure tab and click on Network-wide settings) so access points can individually pick their own channel based on the RF interference they detect.
6. If you are using Meraki 802.11n hardware, consider using the 5 GHz band to avoid the often congested 2.4 GHz band.
Using this new tool and following these simple tips will help you minimize RF interference effects in your Meraki network and optimize performance.
