Accessories

  • Mounts

    • Wall Mount Arm

      Wall Mount Arm

      For: MV21, MV71 

      $249

      Wall Mount Arm

      Wall Mount Arm

      $249

      Contact Sales

      Technical Specifications

      Compatibility

      • MV21
      • MV71

      Includes

      • Pendant cap

      Dimensions

      • Wall Arm: 140mm × 244mm × 225.4mm
      • Pendant Cap: 179.99mm × 49.9mm (diameter × height)

      Weight

      • 1.64kg

      Ordering Information

      • MA-MNT-MV-1
    • Pole Mount

      Pole Mount

      For: MV71 

      $199

      Pole Mount

      Pole Mount

      $199

      Contact Sales

      Technical Specifications

      Compatibility

      • MV71
      • Can be combined with Wall Mount Arm (MA-MNT-MV-1)
      • For poles with diameter between 40mm - 145mm (1.57in - 5.71in)

      Dimensions

      • 156.7mm × 240mm × 68.9mm

      Weight

      • 1.106kg

      Ordering Information

      • MA-MNT-MV-2
    • L-Shape Wall Mount Bracket

      L-Shape Wall Mount Bracket

      For: MV21, MV71 

      $199

      L-Shape Wall Mount Bracket

      L-Shape Wall Mount Bracket

      $199

      Contact Sales

      Technical Specifications

      Compatibility

      • MV21
      • MV71

      Dimensions

      • 206mm × 182mm × 110mm

      Weight

      • 0.917kg

      Ordering Information

      • MA-MNT-MV-3
  • Power

    • 802.3at PoE Injector

      802.3at PoE Injector

      For: MV21, MV71 

      $149

      802.3at PoE Injector

      802.3at PoE Injector

      The Cisco Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Cisco Meraki 802.3at-compatible devices. Check the access point specifications to ensure compatibility.

      $149

      Contact Sales 802.3at PoE Injector Datasheet

      Features & Benefits

      Easy Installation

      Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

      Technical Specifications

      Power

      • Input Voltage: 100 to 240 VAC
      • Input Current: 0.8A maximum
      • AC Input Frequency: 50-60 Hz
      • Maximum Output Power: 30 W
      • Powered device can be up to 100m away from power injector

      Data

      • Compatible with 10/100/1000 Mbit/s Ethernet, full duplex

      Environmental

      • Operating Temperature: (32 to 104°F (0 to 40°C)
      • Storage Temperature: (-4 to 158°F (-20 to 70°C)
      • Operating Humidity: 5 to 93%

      Additional Features

      • Short-circuit protection

      Physical Dimensions

      • 6.3” x 2.1” x 1.4” (160 mm x 52.5 mm x 35.5 mm)
      • Weight: 0.46 lb (210 g)

      Mounting

      • Mounts to walls (anchors and screws not included)

      Compatibility

      • Complies with 802.3at standard
      • Backward compatibility with 802.3af MR-series access points

      LED Indicators

      • Input Power
      • Fault
      • Detect/connected to valid 802.3at load

      Ordering Information

      • MA-INJ-4-US Meraki 802.3at Power over Ethernet Injector (US plug)
      • MA-INJ-4-EU Meraki 802.3at Power over Ethernet Injector (EU plug)
      • MA-INJ-4-UK Meraki 802.3at Power over Ethernet Injector (UK plug)
      • MA-INJ-4-AU Meraki 802.3at Power over Ethernet Injector (AU plug)